| 1.Raw material | Waste paper,Cellulose |
| 2.Output paper | Fluting paper,Kraft paper |
| 3.Output paper weight | 70-180 g/m2 |
| 4.Output paper width | 1800-5100mm |
| 5.Wire width | 2350-5700 mm |
| 6.Capacity | 20-400 Tons Per Day |
| 7. Working speed | 80-400m/min |
| 8. Design speed | 100-450m/min |
| 9.Rail gauge | 2800-6300 mm |
| 10.Drive way | Alternating current frequency conversion adjustable speed, sectional drive |
| 11.Layout | Left or right hand machine |
Waste paper or Cellulose → Stock preparation system→ Wire part→ Press part→ Dryer group→ Sizing press part→ Re-dryer group→ Calendering part → Paper scanner→ Reeling part→ Slitting&Rewinding part
Requirements for Water, electricity, steam, compressed air and lubrication:
1. Fresh water and recycled use water condition:
Fresh water condition:clean,no color,low sand
Fresh water pressure used for boiler and cleaning system:3Mpa、2Mpa、0.4Mpa(3 kinds) PH value:6~8
Reuse water condition:
COD≦600 BOD≦240 SS≦80 ℃20-38 PH6-8
2. Power supply parameter
Voltage:380/220V±10%
Controlling system voltage:220/24V
Frequency:50HZ±2
3. Working steam pressure for dryer ≦0.5Mpa
4. Compressed air
● Air source pressure：0.6～0.7Mpa
● Working pressure：≤0.5Mpa
● Requirements： filtering、degreasing、dewatering、dry
Air supply temperature:≤35℃
1.Project investment and profit analysis
2.Properly designed and precision manufacturing
3.Installation and test-run and training
4.Professional technical support
5.Good after- sale service