1. The paper return rack adopts pneumatic paper loading and stepless speed ratio adjustment to adjust the tension of different paper
2. The finished products with different widths can be folded as required, and point cutting or full cutting can be selected
3. The base paper alignment function can be configured as required
4. Automatic shutdown system for paper breaking to avoid waste products caused by no paper or paper breaking
5. Use the front and rear inching switches to pull the base paper, which makes the operation simpler and safer
| Model | 5L/6L/7L |
| Product Size | 180-200mm (Other size is available) |
| Gram weight range of double-layer base paper | Single layer 13-18g (Other size is available) |
| Maximum base paper size | Φ1200×1000mm-1450mm(Other size is available) |
| Paper Core Inner Dia | 76.2mm(Other size is available) |
| Speed | 0-100m/min |
| Host power | 5.5kw 7.5kw |
| Vacuum power | 11kw 15kw |
| Paper breaking mode | Single side single knife |
| Base paper detection | with automatic deceleration shutdown and paper break detection shutdown system when the base paper is exhausted |
| Mechanical transmission mode | Electric drive, gear chain reducer, synchronous belt, flat belt, chain, V-belt drive |
| Base paper loading system | Pneumatic automatic paper feeding system |
| Paper backing | 2-4 layers(please specify) |
| Folding roll gap | The gap of folding roller is adjustable |
| Paper output skip system | Pneumatic integral movable paper outlet base plate |
| Paper output system | The smooth conveyor belt is used to assist the paper output with stepless speed change |
| Embossing Device | Steel to steel, steel to plastic |
| Trimming system | Vacuum trimming adsorption system |
| Dimension | 6000mm×2000mm-2500mm×2050mm |
| Weight | Depended on the model and configuration to the actual weight |